GA-2_clipped_rev_1_1

IMG_3936-mit-Variente-ste_clipped_rev_1

IMG_3947-mit-Variante-c-für-LK_clipped_rev_1

IMG_3951-mit-Variante-dpl-g-und-dpl-p_clipped_rev_1

IMG_3949-mit-Variante-dpl-g-1_clipped_rev_1

IMG_3950-mit-Variante-dpl-g-2_clipped_rev_1

IMG_3952-mit-Variante-dpl-p_clipped_rev_1

BW-Fixators® – Series LK:

The BW-Fixators® of series LK have been invented especially for the anti-vibrant and loose alignment of machines. Due to a exceedingly long setting range of 10 mm uneven surface can be compensated easily. It can handle load values up to 55.000 N.

The adjustment is easy in operation and safe from unintentional adjustment (e.g. vibration). The applications of these BW-Fixators® can be customized by a lot of different variants. Different isolation plates, made from multiple layers jute fabric combined with special bitumen under high pressure or isolation plates made of polyurethane allow the anti-vibrant alignment.

The time for the alignment of your machine will be reduced significant. If the machines needs to be re-adjusted because of foundation shifting or shrinkage, it can be done simply and fast.

The alignment can be done loose or with diffrent anchors.

Downloads

Installation Varieties and Technical Information:

Instruction for installation:

Machine-alignment with BW-Fixators®:

Dimensions of series LK

GA Basic Unit

Size		L	B	H	ØD		SW	h	l	b	e1	e2	c
II		195	110	60	70		19	10	100	95	14	26	28

Size	f1	f2	M
II	17	19	M 16

b

Machined bottom of the housings,
the height is 2 mm less

Technical Data of series LK

Size		Dim	LK II
Permissible maximum load		N	55.000
Permissible maximum lifting load		N	40.000
Torque at adjusting screw	Maximum-	Nm	35
Torque at adjusting screw	Security-	Nm	4-7
Vertical Adjustment per screw turn		mm	0.37
Weight of basic unit		kg	4,2

Note: The BW-Fixators® series LK cannot be adjusted with the anchor screw tightened.

Determining BW-Fixator® Sizes
Divide the total load ( machine weight and workpiece ) by the number of bearing points to determine the average load per mount. Select a mount size with an equal or greater recommended static load.
For machinery with sizable variations in partial weight, it is the heaviest machine load that has to be devided by the number of bearing points and the resulting BW-Fixator® size has to be used everywhere under the machine.

Horizontal stiffness values and coefficients for the frequency-dependent spring-damper-model available on request.

Anchor bolts and studs

due

Resin anchor
(Capsule and stud)

					e		Hole		Max. Torque	Clamping Force*
LK	M	L	SW	f	von	bis	ØD	T	Nm	max. N
II	M16	300	10	35	0	80	18	125	60	15.000

*Concrete ≥ B 25

due/2

Split resin anchor
(Capsule and split stud)

				e		Hole		Max. Torque	Clamping Force*
LK	M	L	n	von	bis	ØD	T	Nm	max. N
II	M16	150	40	0	70	18	125	60	15.000

*Concrete ≥ B 25

Note: Specify dimension “e” (thickness of machine leg) in your order.

ste

Short or long stud bolt for attaching the machine to the BW-Fixator®

		L	e		L	e		Max. Torque	Clamping Force
LK	M	kurz	von	bis	lang	von	bis	Nm	max. N
II	M16	150	0	50	180	55	80	60	15.000

Note: Specify dimension “e” (thickness of machine leg) in your order.

c

Side anchor bolts for connecting BW-Fixator® to the foundation
2 resin anchors and 2 studs

				Hole		Max. Torque	Clamping Force
LK	M	L	a	ØD	T	Nm	max. N
II	M12	160	95	14	110	30	20.000

Other Applications

le

Extended set screw on BW-Fixator® arranged inwards of the machine side

			length
LK	a	SW	min. l	Tube
II	50	22	150	24x4

dpl-g-(s)

Isolating plate for not anchored machine installation
thickness s available with 1, 3, 5 mm
Material: bituminous textile

LK	L	B	H
II	190	107	60+s

Specify in order s and if the plate shall be sticked to the Fixator bottom.

dpl-p

Isolating plate for not anchored machine installation
Material: Polyurethane

LK	L	B	s	H
II	190	107	6	66

The plate is sticked to the BW-Fixator® bottom.

p

Spherical washer set for non-parallel bearing surfaces

LK	ØD	H	Ød	b
II	40	9	30	17

r

Large spherical washer set for non-parallel bearing surfaces

LK	ØD	H	Ød	b
II	44	10	36	17