IMG_2708_clipped_rev_1

IMG_2685-mit-SE_clipped_rev_1

IMG_2689-mit-SE_clipped_rev_1

IMG_2694-mit-SM_clipped_rev_1

BW-Fixators® – Series MS:

BW-Fixators® series MS are the ideal leveling element for aligning the electric engine to the aggregate. With our BW-Fixators® series MS the shafts can be aligned to each other in the most simple way. They further work well as an adjustment assistance for shaft alignment devices.

BW-Fixators® series MS are easy to operate and to adjust with precision. The time for the alignment will be reduced significant. With it’s accessory and anchoring methods the series MS covers a wide range of applications.

Downloads

Installation Varieties and Technical Information:

Instruction for installation:

Machine alignment with BW-Fixators®:

Dimensions of series MS

GA Basic Unit

Size	a	ØD	H	h	M			f	l	c	Ød	R	e1	e2
I	40	70	40	12	12	16	20	14	68	56	85	50	12	23
II	60	110	40	12	16	20	24	14	75	58	100	60	14	26
II	80	150	40	12	16	20	24	14	75	58	100	60	14	26
III	110	210	50	12	24	30	36	14	85	70	140	80	18	32
III	150	210	50	12	24	30	36	14	85	70	140	80	18	32

Description:

As shown in the above chart, the BW-Fixator® MS comes in five sizes. The vertical alignment is accomplished from the top with a threaded element. It has two lateral adjusters providing positive horizontal positioning. To ensure positive support the bearing plate incorporates a spherical seat. Normally the BW-Fixator® MS will be fastened to a steel base frame. It can also be adapted to concrete pedestal installations.

Technical Data of series MS

Size	Dim	MS I / II			MS II	MS III
Vertical levelling screw		M12	M16	M20	M24	M24	M30	M36
Permissible maximum lifting load	kN	8	20	30	40	40	50	60
Max. torque at levelling screw	Nm	40	100	150	200	300	400	450
Max. torque at the nut	Nm	55	140	270	450	450	900	1.600
Vertical adjustment per screw turn		all sizes 1 mm

Size	Dim	MS I	MS II	MS III
Lateral levelling screw		M10	M12	M16
Max. torque	Nm	25	35	60
Permissible max. adjusting load	N	18	22	26

Varianten

a

Distance between center hole and vertical wall

MS I				MS II					MS III
a-40				a-60	a-80				a-110	a-150

se

Hold-down and adjusting bolt

	M
MS I	12	16	20
MS II	16	20	24
MS III	24	30	36

Note: Specify the measures “eo and eu” for the thickness of motor frame and base frame in your order.

sm

Adjusting bolt with lock nuts

	M
MS I	12	16	20
MS II	16	20	24
MS III	24	30	36

zn

Galvanized element

Zubehör

p

Spherical washer set for non-parallel bearing surfaces

MS	ØD	H	Ød	Øb
p-M12	40	9	30	13
p-M16	40	9	30	17
p-M20	44	10	36	21
p-M24	56	13	44	25
p-M30	68	16	56	31
p-M36	78	20	68	37

r

Large spherical washer set for non-parallel bearing surfaces

MS	ØD	H	Ød	Øb
-	-	-	-	-
r-M16	44	10	36	17
r-M20	56	13	44	21
r-M24	68	16	56	25
r-M30	80	16	56	31
r-M36	100	20	68	37

Size	a	ØD	H	h	M			f	l	c	Ød	R	e1	e2
I	40	70	40	12	12	16	20	14	68	56	85	50	12	23
II	60	110	40	12	16	20	24	14	75	58	100	60	14	26
II	80	150	40	12	16	20	24	14	75	58	100	60	14	26
III	110	210	50	12	24	30	36	14	85	70	140	80	18	32
III	150	210	50	12	24	30	36	14	85	70	140	80	18	32

Size	a	ØD	H	h	M			f	l	c	Ød	R	e1	e2
I	40	70	40	12	12	16	20	14	68	56	85	50	12	23
II	60	110	40	12	16	20	24	14	75	58	100	60	14	26
II	80	150	40	12	16	20	24	14	75	58	100	60	14	26
III	110	210	50	12	24	30	36	14	85	70	140	80	18	32
III	150	210	50	12	24	30	36	14	85	70	140	80	18	32

Size	a	ØD	H	h	M			f	l	c	Ød	R	e1	e2
I	40	70	40	12	12	16	20	14	68	56	85	50	12	23
II	60	110	40	12	16	20	24	14	75	58	100	60	14	26
II	80	150	40	12	16	20	24	14	75	58	100	60	14	26
III	110	210	50	12	24	30	36	14	85	70	140	80	18	32
III	150	210	50	12	24	30	36	14	85	70	140	80	18	32